[2.20] Settings > Service; [2.20.02] Heaters; [2.20.02] Heaters Oxymat 7; [2.20.02] Heaters Ultramat 7 - Siemens SIPROCESS GA700 Operating Manual

Functions
6.14 [2.20] Settings > Service
6.14 [2.20] Settings > Service
6.14.1

[2.20.02] Heaters

6.14.1.1

[2.20.02] Heaters OXYMAT 7

Service menu. You only have read access.
The following information is displayed in this menu:
● Indication of the type of installed sample chamber.
● Display of temperature setpoints and actual values from sample chamber and measuring
head.
6.14.1.2

[2.20.02] Heaters ULTRAMAT 7

Service menu. You only have read access.
The following information is displayed in this menu:
● Indication of the type of installed sample chamber.
● Indication of the activation state of the gradient controller. When the gradient controller is
active, the corresponding temperature setpoint and actual temperature value are
displayed.
● Display of the current chopper temperature.
6.14.1.3

[2.20.02] Heaters CALOMAT 7

Service menu. You only have read access.
The following information is displayed in this menu: Temperature setpoint and actual
temperature values of the measuring block and the membrane.
6.14.2

[2.20.03] Factory calibrations

6.14.2.1

Overview

The following calibrations are grouped under the term "Factory calibrations":
● Signal frequency
● Phase calibration
● Normalization
Factory calibrations may be necessary, for example, after changes to the reference gas.
190
Operating with the Local User Interface
Operating Manual, 06/2017, A5E31930478-05