[2.14] Settings > Set Message Parameters; Set Message Parameters - Siemens SIPROCESS GA700 Operating Manual

6.13 [2.14] Settings > Set message parameters
6.13.1

Set message parameters

Procedure
1. Main menu > "2 Settings" > "14. Set message parameters"
This menu includes a filter in addition to the current messages that you can use to
influence the display range of this menu.
Changed filter settings have a direct effect on the menu.
The menu entries have the following structure:
1)
2)
3)
4)
5)
6)
7)
2. Set filter: Filtering messages (Page 188).
3. Set individual message parameters: Set individual message parameters (Page 189).
Operating with the Local User Interface
Operating Manual, 06/2017, A5E31930478-05
Structure of the navigation lines
Device
2) 3)
Device
2) 3)
Activation status of filter. Default "Inactive"
Symbol for identification of measuring type
Display that acknowledgment is required. Yes:
Message reference: message refers to the device, a module, or a component. The correspond-
ing designations are displayed.
Message number
Message text
Activation status of message / editing line
6.13 [2.14] Settings > Set message parameters
0208 Ext. maint. demand 1:
4) 5)
0209 Ext. maint. demand 2:
4) 5)
/ No:
Filter inactive/active
1)
6)
On
6)
On
Functions
Edit
7)
7)
187