Modifying Grid Test Pattern Characteristics; Enabling A Specific Test Pattern Color; Selecting An Engine Test Pattern; Viewing Mirage 304K Status - Christie Mirage 304K User Manual

Modifying grid test pattern characteristics

Modify the characteristics for the associated grid test patterns.
1. Select MENU > Admin > Diagnostics.
2. Select Test Pattern.
3. Select one of the grid test patterns: SQUARE GRID or DIAGONAL GRID.
4. Select Enter.
5. To change the pitch of the grid test pattern, select Test Pattern Grid Pitch and adjust the
slider to the value you want.
6. To confirm your selection, select Enter.
7. To change the color of the grid, select Test Pattern Grid Color and select Enter.
8. To enable movement of the test pattern, select Test Pattern Grid Motion and select Enter.

Enabling a specific test pattern color

You can enable a specific test pattern color to eliminate one or more colors to help with certain
diagnostics and setups, such as overlaying one image on top of another from stacked projectors.
1. From the side panel home page, use the arrows to select Test Pattern.
You can also select the test patterns from MENU > Test Pattern.
2. Select the Flat White test pattern.
3. To confirm your selection, select Enter.
4. On the IR remote keypad, press Func+6+<0 to 7>.
Where <0 to 7> represents a specific color.

Selecting an engine test pattern

Several engine test patterns are available to assist with the calibration and internal optical alignments
of the projector and to diagnose any issues that may occur.
1. Select MENU > Admin > Diagnostics > Test Pattern > Engine Test Patterns.
2. Scroll through the list of test patterns.
3. Select the required test pattern.
4. To confirm your selection, select Enter.
5. To disable the engine test patterns, select MENU > Admin > Diagnostics > Test Pattern >
Engine Test Patterns > Off.

Viewing Mirage 304K status

Alarms contain information about the values of the items operating in normal range, warnings, and
errors that can be reported by the status system of Mirage 304K.
1. From the display panel, select Status.
You can also view the statuses from MENU > STATUS.
2. Scroll to the status category you want to view and select it.
Mirage 304K (Bm.1) User Guide
020-101778-12 Rev. 1 (04-2020)
Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
Diagnostic tools
57