Table of Contents
Advertisement
Polycom RPX HD User Guide
Answering Calls
Answering Video Calls
Answering Audio Calls
Controlling Audio
2–30
Hanging Up Audio Calls
To hang up an audio call:
If the
Hang Up button is not visible on your screen, touch
1
Polycom.
Touch the
2
This section describes how to answer video and audio calls that you receive
when in an RPX suite.
When you receive a video call, you hear a ringing sound.
To answer a video call:
>> You do not have to do anything to answer the call. The call will be
automatically answered by the RPX.
When you receive an audio call, you hear a ringing sound and the Touch Panel
automatically displays the Home screen for the Enhanced UI (shown in
Figure
2-2) or the Audio Dial screen for the Classic UI (shown in
so that you can easily answer the call.
To answer an audio call:
>> Touch
When you place a video call, the audio level defaults to the volume it was set
at the last time the RPX was used. A horizontal bar on the Touch Panel shows
the audio level. You can change the audio in these ways:
•
During both video and audio calls, touch
Volume Down to increase or decrease the sound you hear from the far
end.
Hang Up button on the center of the screen.
Dial/Answer.
Figure 2-21)
Volume Up or
Advertisement
Table of Contents
