Table of Contents
Advertisement
Hanging Up Calls
Manually Dialing Audio Calls
To manually dial an audio call when you are using the Classic UI:
Touch
Audio Dial.
1
The Audio Dial Screen for the Classic UI appears as shown in
on
page
2-27.
Enter the telephone number that you want to call using the touch pad,
2
and then touch
To get an outside line, you should dial the number the same way you
would dial an ordinary telephone in your organization. For example,
some organizations require you to dial a 9 before the number.
If you make a mistake while dialing, touch
or touch
Clear to erase the number and start over.
If you touch the
system must hang up the audio call in order to place the help call. A message
informs you of this before hanging up the audio call. For more information about
placing help calls, refer to
If you are on a video call and an audio call concurrently, you must hang up the
calls separately. This section describes how to hang up both types of calls.
Hanging Up Video Calls
To hang up a video call:
If the
Hang Up button is not visible on your screen, touch
1
Polycom.
Touch the
2
The message "The call has ended" appears on the screen.
Dial/Answer.
Help Desk button when an audio call is connected, the
Getting Help
on page 2-31.
Hang Up button on the center of the screen.
Using the Touch Panel
Figure 2-21
Back to edit the number
2–29
Advertisement
Table of Contents
