Placing Audio-Only Calls And Adding Audio-Only Sites - Polycom HDX Systems User Manual

Placing Audio-only Calls and Adding Audio-only Sites

Placing an Audio-only Call
Adding an Audio-only Call to a Video Call
Adding a Video Call to an Audio-only Call
© Polycom, Inc.
You may be able to use your Polycom HDX system to place an audio-only call
or add an audio-only call to a video conference.
You can place an audio-only call from Polycom HDX systems that have Analog
Phone, Voice Over ISDN, or Voice Over IP enabled.
To place an audio-only call from your system:
1. On the Place a Call screen, enter the number you want to call.
To place a call within your PBX system, enter the internal extension
instead of the full number.
To delete a digit, press
2. Press Call to place the call.
To add an audio-only call after your video call connects:
1. Press Call on the remote control.
2. Select Add Call.
3. Use the number buttons on the remote control to enter the telephone
number of the audio participant that you want to add to your video
conference.
4. Press Call on the remote control.
If you are already in an audio-only call, you can add a video call to your call.
To add a video call after your audio-only call connects:
1. On the Place a Call screen, enter the number you want to call.
2. Press Call to place the call.
Delete on the remote control.
C A
ALLING AND NSWERING
7