People+Content Ip - Polycom RealPresence Experience RPX HD User Manual

Polycom RPX HD User Guide
3–10
The following then occurs:
— The words "Local Content" and "Laptop" on the Touch Panel change
from white to yellow:
— If there are tabletop content monitors in the room, the content appears
on all of those content monitors.
— If the other site in the conference is another RPX HD or an OTX 300,
the content appears on their tabletop content monitors.
— If the other site in the conference is a TPX HD, the content appears on
their tabletop content monitors (if their room is equipped with these),
on their auxiliary content monitor (if their room is equipped with
one), and on their right display (if they have a TPX HD 306M, Version
2.0 or later, if they have that option enabled, and if the codec
connected to the right display is not being used in the call).
— If the other site in the conference uses traditional (standalone) video
conferencing equipment, the content appears on their content
monitor. If the site has only one display, the content appears on that
display.
When you are done using the laptop, touch
5
Panel.
Always disconnect the cables from the laptop when you are
IMPORTANT:
done displaying the content so that you do not inadvertently display any
private or personal content that may be stored on the laptop

People+Content IP

If you are calling from a remote location and do not have access to a VGA
cable, you can use the People+Content IP application to share content on your
laptop.
To share content with a laptop using People+Content IP:
Download the People+Content IP application from the Polycom website.
1
Laptop on the Touch
.