Table of Contents
Advertisement
— If the other site in the conference is a TPX HD, the content appears on
their tabletop content monitors (if their room is equipped with these),
on their auxiliary content monitor (if their room is equipped with
one), and on their right display (if they have a TPX HD 306M, Version
2.0 or later, if they have that option enabled, and if the codec
connected to the right display is not being used in the call).
— If the other site in the conference uses traditional (standalone) video
conferencing equipment, the content appears on their content
monitor. If the site has only one display, the content appears on that
display.
When you are done using the laptop, do the following:
5
— If the laptop is the only content source, touch
top of the Touch Panel screen.
— If there is more than one content source, touch
the Content screen for the Enhanced UI.
Always disconnect the cables from the laptop when you are
IMPORTANT:
done displaying the content so that you do not inadvertently display any
private or personal content that may be stored on the laptop
Classic User Interface
To view content with a laptop when you are using the Classic UI:
Access the VGA and audio cable in the cable tray.
1
Connect the VGA connector on this cable to the VGA Out connector on
2
your laptop.
Note that some laptops require you to enable VGA output (such as by
pressing Shift-F5). Refer to your laptop documentation for more
information.
If you want to transmit audio, connect the audio connector on this cable
3
to the Audio Line Out connector on your laptop.
Note that even if you want to send audio-only content, you must first
share video.
Display the content on your laptop screen, and then touch
4
on the Touch Panel.
Viewing People and Content
Content at the
Laptop on
.
Laptop
3–9
Advertisement
Table of Contents
