Table of Contents
Advertisement
Classic User Interface
To view content with an integrated PC when you are using the Classic UI:
Display the content on the PC screen, and then touch
1
Touch Panel.
The following then occurs:
— The words "Local Content" and "PC" on the Touch Panel change from
white to yellow:
— If there are tabletop content monitors in the room, the content appears
on all of those content monitors.
— If the other site in the conference is another RPX HD or an OTX 300,
the content appears on their tabletop content monitors.
— If the other site in the conference is a TPX HD, the content appears on
their tabletop content monitors (if their room is equipped with these),
on their auxiliary content monitor (if their room is equipped with
one), and on their right display (if they have a TPX HD 306M, Version
2.0 or later, if they have that option enabled, and if the codec
connected to the right display is not being used in the call).
— If the other site in the conference uses traditional (standalone) video
conferencing equipment, the content appears on their content
monitor. If the site has only one display, the content appears on that
display.
When you are done using the integrated PC, touch
2
Touch Panel.
Viewing People and Content
PC on the
PC on the
3–17
Advertisement
Table of Contents
