Downloading Parameters - Kodak CR 360 Service Manual

Downloading Parameters

[1] Establish communication between the host computer and the IMCS board. (See
Between the Host Computer and the IMCS Board on Page
[2] Create a communication terminal. (See
Page 187.)
[3] Open the communication terminal. (See
Page 188.)
[4] Select File>Download Controller Params.
[5] Browse to the folder POC360\IMCS (on the supplied CD) and select the PARAMETERS.prm file.
[6] Click Open.
[7] At the message "Parameter File Download Operation OK!", click OK.
6H4869
Controller and IMCS Embedded Software Update
185.)
Creating a Communication Terminal in the SC Shell Application on
Opening the Communication Terminal in the SC Shell Application on
Establishing Communication
197