Key Operator Settings; Accessing Advanced Settings - Kodak CR 360 Service Manual

Key Operator Settings

Section 7: Key Operator Settings
The advanced settings wrench is used to access advanced features of the QC and CR software. Available tabs
depend on the user's designation. (See Admin Tab on Page 147.)

Accessing Advanced Settings

To enter Advanced Settings, go to User>Settings.
For an Operator-level user, a list box opens with three options: Settings, Procedure Mapping, and Annotations
Tool.
When the operator selects Settings, two tabs are provided: About and User.
For a Key Operator or a Full Service Operator, a list box opens with four options: Settings, DICOM Settings,
Procedure Mapping, and Annotations Tool.
When these personnel select Settings, available tabs depend on the user's designation.
6H4869 135