Setting The Site Parameters - Kodak DirectView CR 825 Installation Instructions Manual

INSTALLATION INSTRUCTIONS
10MAR06

Setting the Site Parameters

II4825-1
Page
1 From the main menu, touch:
30 of 72
• [Service Functions]
• [Network Configuration]
2 Type:
• "Local IP Address"
• "Computer/Station Name"
• "Subnet Mask"
• "Default Gateway"
• "RAS IP Address Range"
• "Network Speed/Duplex"
3 At the "Microsoft Internet Explorer" message, click [OK].
Note
The system boots.
4 If necessary, at the "AddOnInit-SUCCESS" screen, click [OK].
5 If the "Desktop" screen displays for
more than one minute, click [Restart].
Installation