Maintenance; Instructions - Hyundai HL930A Operator's Manual

1. INSTRUCTIONS

1. INSTRUCTIONS
1) 1) INTERVAL OF MAINTENANCE INTERVAL OF MAINTENANCE
(1)
You may inspect and service the machine by the
period as described at page 6-10 based on ser-
vice meter of monitor.
(2) Shorten the interval of inspect and service
depending on site condition. (such as dusty
area, quarry, sea shore and etc.)
(3)
Practice the entire related details at the same
time when the service interval is doubled.
For example, in case of 250 hours, carry out all
the maintenance 「each 250 hours, each 100
hours and daily service」 at the same time.
2) 2) PRECAUTION PRECAUTION
(1)
Start to maintenance after you have the full
knowledge of machine.
(2) The monitor installed on this machine does not
entirely guarantee the condition of the machine.
Daily inspection should be performed according
to clause 4, maintenance check list.
(3)
Engine and hydraulic components have been
preset in the factory.
Do not allow unauthorized personnel to reset
them.
(4) Drain the used oil and coolant in a container and
handle according to the method of handling for
industrial waste to meet with regulations of each
province or country.
Hot oil and hot components can cause per- Hot oil and hot components can cause per-
sonal injury. Do not allow hot oil or hot com- sonal injury. Do not allow hot oil or hot com-
ponents to contact skin. ponents to contact skin.
Accumulated grease and oil on the machine Accumulated grease and oil on the machine
is a fire hazard. Remove this debris with is a fire hazard. Remove this debris with
steam cleaning or high pressure water, at steam cleaning or high pressure water, at
least every 1000 hours. least every 1000 hours.
Inspect the engine compartment for any trash Inspect the engine compartment for any trash
build up. Remove any trash build up from the build up. Remove any trash build up from the
engine compartment. engine compartment.
(5)
Ask to your local dealer or Hyundai for the main-
tenance advice if unknown.

6. MAINTENANCE

6. MAINTENANCE
6-1
740F6MI17