Adjustment Of The Work Equipment - Hyundai HL930A Operator's Manual

8. ADJUSTMENT OF THE WORK EQUIPMENT

8. ADJUSTMENT OF THE WORK EQUIPMENT
The bucket can be adjusted to a height desired by
using the boom kick-out device.
Park the machine on level ground and block the Park the machine on level ground and block the
tires to prevent sudden movement of the tires to prevent sudden movement of the
machine. machine.
Press the parking brake switch. Press the parking brake switch.
Fix the front and rear frames by using the safe- Fix the front and rear frames by using the safe-
ty lock bar. ty lock bar.
Do not work underneath the work equipment. Do not work underneath the work equipment.
1) 1) ADJUSTMENT OF THE BOOM KICKOUT AND ADJUSTMENT OF THE BOOM KICKOUT AND
BUCKET LEVELER BUCKET LEVELER
(1) (1)
Lift kickout position Lift kickout position
To set the lift kickout, raise the bucket to the
desired position above the midway point. Then
push icon ( , A) for 2~3 seconds. The boom
will return to the programmed position when the
raise detent is activated and the boom is below
the kickout position.
(2 (2)
Lower kickout position Lower kickout position
To set the lower kickout, lower the bucket to the
desired position below the midway point. Then
push icon ( , A) for 2~3 seconds. The boom
will return to the programmed position when the
float detent is activated and the boom is at least
a foot above the kickout position.
(3 (3) Bucket leveler position Bucket leveler position
To set the bucket leveler, roll back the bucket to
the desired position. Then push icon (
for 2~3 seconds. The bucket will return to the
programmed position when the roll back detent
is activated and the bucket is below the leveler
position.
Detent setting switch
Bucket pivot pin
Midway
point
, B)
Neutral
4-22
A
B
Boom pivot pin
Detent position
940A4OP28