-
In the case of project status, it is displayed as 'Loaded weight / Target weight'.
In the case of project status, if the accumulated value exceeds the target value, the text
of the accumulated value is displayed in red.
⑤
Remaining weight to complete job (or Over weight to complete job)
Remaining weight to complete job (or Over weight to complete job)
-
This setting is displayed only when Truck status is selected.
-
Displays the amount of work remaining from the current accumulated value to the
target value. (Current cumulative value - Truck target value)
-
⑥
Progress bar/ Total weight
Progress bar/ Total weight
-
If the current cumulative value is below the target, it is marked with negative number
and green, and if it exceeds the target, it is marked with positive number and red.
⑦
Select button for mode (Standby mode / Weigh mode)
Select button for mode (Standby mode / Weigh mode)
-
In the Standby mode, the measured current weight value is not added to the
accumulated value.
-
In Weigh mode, the measured current weight value is added to the accumulated value.
Set to Weigh mode when 'ON' is displayed and Standby mode when 'OFF' is displayed
⑧
Project Name
Project Name
-
If you touch the right Project icon and text on the Weighing System main screen,the
following pop-up is created.
940A3CD15
940A3CD16
3-42-2
940A3CD14