Table of Contents
Advertisement
※
Do not remove the rocker lever gasket on
Do not remove the rocker lever gasket on
engines in which the rocker lever cover gasket is
engines in which the rocker lever cover gasket is
fit into a groove at the base of the rocker lever
fit into a groove at the base of the rocker lever
cover. The gasket is reusable. Once the gasket is
cover. The gasket is reusable. Once the gasket is
removed from the rocker lever cover, it must be
removed from the rocker lever cover, it must be
replaced.
replaced.
(4)
Remove the mounting nuts and isolators from
the rocker lever cover.
※
If equipped, it may be necessary to gently pry
If equipped, it may be necessary to gently pry
the breather tube connection from the back of
the breather tube connection from the back of
the rocker lever cover while removing.
the rocker lever cover while removing.
Remove the rocker lever cover.
(5)
※
Check the gasket while it is installed in the valve
Check the gasket while it is installed in the valve
cover. Once the gasket is removed from the
cover. Once the gasket is removed from the
cover it must be replaced.
cover it must be replaced.
(6)
Check the gasket for cracks on the sealing sur-
face.
Replace the gasket if damage is present.
Replace the gasket if it is removed from the
groove in the rocker lever cover.
(7)
Inspect the rubber isolators for cracks.
Replace if cracked or broken.
※
If the gasket has been removed from the rocker
If the gasket has been removed from the rocker
lever cover, a new gasket must be used.
lever cover, a new gasket must be used.
(8)
If replacing the press-in rocker lever gasket, the
following installation procedure must be used.
·
Press the molded gasket into the corners of the
rocker lever cover.
·
Press the rest of the gasket into the rocker lever
cover.
6-34
220SA6MA113
220SA6MA114
220SA6MA115
220SA6MA116
Advertisement
Table of Contents
