Table of Contents
Advertisement
11)
11)
WORKLOAD BUTTON
WORKLOAD BUTTON
Workload button
760F3CD150A
12)
12)
HAZARD SWITCH
HAZARD SWITCH
760F3CD151
13)
13)
MULTI FUNCTION SWITCH
MULTI FUNCTION SWITCH
O J Ⅰ Ⅱ
73033CD29
Up
M
Down
73033CD30
Left turning
Right turning
73033CD31
(1)
This button is used to calculate the weight manually.
If the button is not pushed, the weight of the weighing system is
not calculated.
(2)
This button is pushed for one second more, calculated weight
will be accumulated.
※
Refer to the page 3-22, weighing system.
Refer to the page 3-22, weighing system.
(1)
Use for parking or loading the machine.
(2)
Both turn signal lights will flash simultaneously.
※
If the switch is left ON for a long time, the battery may be dis-
If the switch is left ON for a long time, the battery may be dis-
charged.
charged.
(1) (1)
Front wiper and washer switch
Front wiper and washer switch
①
When the switch is in J J position, the wiper moves intermittently.
※
Refer to the page 3-24 (Wiper level
Refer to the page 3-24 (
②
When placed in Ⅰ or Ⅱ position, the wiper moves continuously.
③
If you push the grip of the lever, washer liquid will be sprayed and
the wiper will be activated 2-3 times.
※
Check the quantity of washer liquid in the tank. If the level of
Check the quantity of washer liquid in the tank. If the level of
the washer liquid is LOW, add the washer liquid (in cold, winter
the washer liquid is LOW, add the washer liquid (in cold, winter
days) or water. The capacity of the tank is 1 liter.
days) or water. The capacity of the tank is 1 liter.
※
If the wiper does not operate with the switch in ON (J,
If the wiper does not operate with the switch in ON (J,
tion, turn the switch OFF (O) immediately and check the cause.
tion, turn the switch OFF (O) immediately and check the cause.
If the switch remains ON, motor failure can result.
If the switch remains ON, motor failure can result.
(2) (2)
Dimmer switch
Dimmer switch
①
This switch is used to turn the head lights direction.
②
Switch positions
·Up
: To flash for passing
·Middle : Head lights low beam ON
·Down : Head lights high beam ON
③
If you release the switch when it's in up position, the switch will
return to middle.
(3) (3)
Turning switch
Turning switch
①
This switch is used to warn or signal the turning direction of the
machine to other vehicles or equipment.
②
Push the lever up for turning left, pull the lever down for turning
right.
3-48
Wiper level setting)
setting).
Ⅰ
Ⅱ
,
) posi-
) posi-
Advertisement
Table of Contents
