Hyundai HL930A Operator's Manual page 11

9) 9) AIR CONDITIONER FILTER (item 15) AIR CONDITIONER FILTER
This warning label is positioned on the air-
conditioner filter.
※
Periodic and proper inspection, cleaning Periodic and proper inspection, cleaning
and change of filter prolong air condition- and change of filter prolong air condition-
er life time and maintain good perfor- er life time and maintain good perfor-
mance. mance.
10) 10) ELECTRIC WELDING ELECTRIC WELDING (item 16)
This warning label is positioned on the
side of the battery box.
Before carrying out any electric welding Before carrying out any electric welding
on this machine on this machine
- Pull the connectors out of all electronic
control units.
- Connect the ground lead of the welding
equipment as close to the welding point
as possible.
※
Refer to the page 6-56 for details. Refer to the page 6-56 for details.
11) 11) LIFT & TIE (item 18) LIFT & TIE
This label is positioned on the both side of
the front and rear frame.
- Lifting point - Lifting point
In order to lift the machine, attach the
lifting devices to the lifting points.
- Tying point - Tying point
In order to tie down the machine, attach
the tie-downs to the tying points.
W A R N I N G W A R N I N G
·Before carrying out any electric welding on this
machine
- Pull the connectors out of all electronic control
units.
- Connect the ground lead of the welding equipment
as close to the welding point as possible.
·Read the instructions in operator's manual for
details.
Lifting
Tying
0-9
760F0FW10
7803AFW20
75790FW04