Table of Contents
Advertisement
(12)
(12)
Lumbar support
Lumbar support
(13)
(13)
Backrest adjustment
Backrest adjustment
(14)
(14)
Maintenance
Maintenance
Dirt can impair the function of the seat, so make sure you keep your seat clean.
Upholstery does not need to be removed from the seat frame for cleaning.
Take care with the backrest - it may jerk forward and cause injury. When cleaning the back-
ake care with the backrest - it may jerk forward and cause injury. When cleaning the back-
rest cushion, the backrest must be held in place when operating the backrest lever.
rest cushion, the backrest must be held in place when operating the backrest lever.
※
Do not clean the seat with a pressure washer.
Do not clean the seat with a pressure washer.
During cleaning, the upholstery must not be soaked through.
Use standard commercially available upholstery or plastics cleaning agent.
Test first for compatibility on a small, concealed area.
3)
3)
12V SOCKET
12V SOCKET (option)
77073CD62
4) 4)
MASTER SWITCH
MASTER SWITCH
LED lamp
OFF master switch after lamp off
OFF
760F3CD152
①
0
1
2
②
1
0
+ -
2
290F3CD267
①
②
※
290F3CD268
(1)
Utilize the power of 12 V as your need and do not exceed power of
12 V, 30 W.
(1)
This switch is used to shut off the entire electrical system.
(2)
I : The battery remains connected to the electrical system.
O : The battery is disconnected to the electrical system.
※
OFF master switch after LED lamp off.
OFF master switch after LED lamp off.
※
Never turn the master switch to O O (OFF) with the engine run-
Never turn the master switch to
ning. Engine and electrical system damage could result.
ning. Engine and electrical system damage could result.
3-58
By turning the adjustment knob to the left (2) or
right (1), both the height and curvature of the back-
rest cushion can be individually adjusted.
This increases both the seating comfort and the
performance of the operator.
Pull up the locking lever to release the backrest
catch. When releasing the backrest, do not load the
backrest by pressing against it.
By exerting pressure on or off the front or rear part
of the seat pan it can be moved to the desired posi-
tion. Release the locking lever to lock the backrest.
It should not be possible to move the backrest
It should not be possible to move the backrest
into another position after it has been locked.
into another position after it has been locked.
(OFF) with the engine run-
Advertisement
Table of Contents
