33)
33)
CHANGE THE AXLE OIL
CHANGE THE AXLE OIL
(1)
Place a case under drain plug to catch oil.
(2)
Remove the air breather to relieve internal pres-
sure.
(3)
The basic condition for a correct oil change of
the axle is horizontal plane of installation in every
direction.
Place machine in a horizontal position
(4)
All plugs must be cleaned carefully before open-
ing.
(5)
Loosen drain plugs and drain oil.
(6)
Provide drain plugs with new O-ring and install
them.
(7)
Fill up oil to the overflow on fill & level plug.
・Oil amount
Front axle : 23ℓ (6.1 U.S. gal)
Rear axle : 23ℓ (6.1 U.S. gal)
As the machine is hot after operation, wait
As the machine is hot after operation, wait
until the temperature has dropped.
until the temperature has dropped.
※
If a work requires frequent use of brake,
If a work requires frequent use of brake,
replace it earlier than normal change inter-
replace it earlier than normal change inter-
val.
val.
34)
34)
CLEANING AXLE BREATHER
CLEANING AXLE BREATHER
(1)
Remove dust or debris around the breather.
(2)
Remove the breather and wash it with cleaning
oil.
FRONT AXLE
Fill & oil level plug
Drain plug
REAR AXLE
Air breather
Air breather
6-48
Air breather
Drain plug
Drain plug
Drain plug
Fill & oil level plug
Drain plug
9356MI42
9356MI43