Table of Contents
Advertisement
Collision or cutting
Collision or cutting
·
Never open or remove the engine hood while the machine
is in operation.
·
Two workers should perform the job while the engine is
running:
·
One worker should be ready to operate the machine or to
turn the engine off from the cabin.
·
Keep areas in the vicinity of rotating or moving parts clean.
·
Keep articles in the vicinity of the fan clean.
-
Wear safety gloves when handling the wire cables.
-
Wear protective goggles and protective clothes, if
required.
Preventing fire and explosion
Preventing fire and explosion
·
All fuels and most lubrication oils and coolant mixtures
are inflammable materials, so special care should be
exercised when handling such materials to prevent fire and
explosion.
·
Oil that leaks on to a hot surface or electronic components
may cause a fire.
·
Keep all fuels and lubrication oils in adequate containers.
·
Do not smoke while refueling fuels, or at the refueling
point.
·
Do not smoke in a space where battery electrolyte and
other inflammable materials are handled.
·
Keep the electric connectors clean, and check the
connections for signs of loosening at regular intervals.
·
Do not weld or cut pipes or tubes through which inflammable
fluid flows.
Cautions on decoupling the attachments
Cautions on decoupling the attachments
·
Do not allow unauthorized workers to access the machine.
·
Place the operating machine in a safe position.
·
Install safety fences around the operating machine.
1-26
Advertisement
Table of Contents
