Table of Contents
Advertisement
27)
27)
REPLACEMENT OF ELEMENT IN HYDRAULIC
REPLACEMENT OF ELEMENT IN HYDRAULIC
TANK BREATHER
TANK BREATHER
(1)
Loosen the cap and relieve the pressure in the
tank by pushing the top of the air breather.
Loosen the lock nut and remove the cover.
(2)
(3)
Pull out the filter element.
(4)
Replace the filter element new one.
Reassemble by reverse order of disassembly.
(5)
·Tightening torque : 1.05 ±0.21 kgf·m
28)
28)
REPLACE OF PILOT LINE FILTER
REPLACE OF PILOT LINE FILTER
(1)
Loosen the bowl positioned on the safety valve.
(2)
Pull out the filter element and clean the bowl.
(3)
Install the new element and tighten the bowl
using spanner.
·Spanner size : 27 mm
29)
29)
LUBRICATE RCV LEVER
LUBRICATE RCV LEVER
Remove bellows and grease the joint (A) and the
sliding parts (B).
(7.6±1.5 lbf·ft)
6-41
Cover
Element
Safety valve
Bowl
Cap
Nut
930A6MI25
740F6MI26
A
B
78036MI29
Advertisement
Table of Contents
