Maintenance And Storage - Hyundai 7BL-300 Manual

3) Be especially careful when manipulating on (or crossing) gravel roads, sidewalks
or highways, be alert to potential dangers, pay attention to traffic conditions, and
do not carry passengers.
4) After hitting the debris, stop the transporter and check whether the transporter
is damaged. If the damage is repaired, the transporter can be restarted and
operated.
5) Always pay attention to your feet to avoid slipping or falling.
6) Once the machine experiences abnormal vibration, immediately stop the
transporter to find the cause. Vibration is usually a precursor to failure.
7) When the truck needs to change gears, the clutch handle must be released first
SAFETY INFORMATIONS & WARNINGS
to avoid danger.
8) When the machine is under unmanned operation, release the clutch handle and
turn off the engine.
9) Before cleaning, repairing or inspecting the machine, turn off the engine and
confirm that all moving parts have stopped running.
10) When cleaning the truck, please clean the engine and belt with water.
11) Keep away from children and pets.
12) It is strictly forbidden to use the handling machine for overload transportation.
13) When driving on a sloping road, you should drive at a low speed to avoid
accidents such as vehicle slipping and rollover.
14) The machine must not run at high speed on slippery roads. Please pay
attention to the surrounding conditions and drive carefully when reversing.
15) It is forbidden to start, accelerate, make a sharp turn, or stop abruptly, which is
likely to cause the driver to be injured or the vehicle slips, rolls over and other
accidents.
16) Please do not cross sloping roads to avoid slipping or overturning of the vehicle.
In addition, it is forbidden to turn on sloping roads to avoid reversing, slipping and
overturning of the vehicle.
17) Bystanders are strictly prohibited from approaching the machine.
18) Please follow the guide's instructions and make safety confirmations before
driving on unclear or narrow roads, sloping, undulating roads and other poor
driving environments.
19) In order to prevent uneven loading of the cargo and causing the vehicle to tilt,
please place the cargo evenly and secure it with ropes. In addition, attention must
be paid to the loading height to ensure the sight range.
20) On roads with an inclination of no more than 15°, the load must be controlled
below 300kg; on roads with an inclination of more than 15°, please drive empty,
not on roads with an inclination of more than 20°. Do not change gears when the
allowable load and ramp conditions are exceeded.
21) Please carry out the tipping operation at an inclined position, which may easily
cause the vehicle to tip over. In case of unavoidable circumstances, the car body
must be leveled.
22) Choose to park on a hard ground instead of on a sloping road.

4. Maintenance and storage

1) Ensure that the machine, additional devices and equipment are in a safe
working state.
2) Check whether the shear bolts and other bolts are properly tightened at regular
ENGLISH
26
1
E NGLISH
25