Table of Contents
Advertisement
Parking and Storage
Parking and Storage
Cautions on parking
Cautions on parking
·
Park the machine on the flat ground as possible.
·
If parking the machine on a slope is unavoidable, use
wheel chocks to prevent the machine from moving.
·
Bring the bucket right down to the ground.
·
Make sure that all of the switches are turned to the 'OFF'
position.
·
Make sure that all of the controllers are turned to the
neutral position.
·
Activate the parking brake.
·
Stop the engine, and withdraw the ignition key.
·
Close and lock the windshield, door and cover completely.
·
Install fences around the machine when parking it on a
public road, and put up a warning sign.
Cautions on storage for a long period of time
Cautions on storage for a long period of time
·
Park the machine in accordance with the cautions for parking.
·
When storing the machine for a month or longer, pay
attention the following conditions to prevent deterioration of
the machine performance :
-
Thoroughly clean the machine before storing.
-
Inject sufficient lubrication oil and grease into the injection
ports.
-
If the lubrication oil is deficient, top it up. If the oil is
contaminated, change it.
-
The lubrication oil may deteriorate during storage. Pay
special attention to reusing the oil.
-
The density of the oil may drop during storage.
-
Apply an anti-rust additive to the exposed area of the
piston rod of the cylinder in areas where it is likely to rust
quickly.
-
Keep the master switch mounted in the power box (or
the toolbox on the left of the rear frame of the machine)
turned 'OFF'.
-
Top up the antifreeze in the radiator.
-
Keep the machine in a dry indoor environment.
If storing the machine outdoors is unavoidable, store it on
a wooden pallet.
-
Keep the exposed area of the piston load of the cylinder
covered.
-
Bring the attachments right down to the ground, and
keep the wheels and the track immobile by placing wheel
chocks.
1-30
Advertisement
Table of Contents
