Table of Contents
Advertisement
2. CHECK BEFORE STARTING THE ENGINE
2. CHECK BEFORE STARTING THE ENGINE
1)
Make sure that the steering frame lock bar is
stored in the unlocked position.
The steering frame lock bar must be removed
The steering frame lock bar must be removed
in order to steer the machine.
in order to steer the machine.
2)
Look around the machine and under the machine
to check for loose nut or bolts, collection of dirt, or
leakage of oil, fuel or coolant and check the condi-
tion of the work equipment and hydraulic system.
Check also loose wiring, and collection of dust at
places which reach high temperature.
※
Refer to the daily check on the chapter 6, Main-
Refer to the daily check on the chapter 6,
tenance.
tenance.
3)
Adjust seat to fit the contours of the operator's
body for the pleasant operation.
4)
Make sure that the machine is equipped with a
lighting system that is adequate for the job condi-
tions. Ensure that all lights are in proper working
condition.
5)
Adjust the rear view mirror.
6)
Make sure that there are no personnel in the area
before you start the engine. Make sure that there
are no personnel in area before you move the
machine. Make sure that there are no personnel
on the machine, underneath the machine, or
around the machine.
※
Secure the engine hood in the fully closed posi-
Secure the engine hood in the fully closed posi-
tion prior to starting the engine.
tion prior to starting the engine.
If a warning tag is attached to the starting
If a warning tag is attached to the starting
switch or to the controls, do not star t the
switch or to the controls, do not star t the
engine. Also, do not move any controls.
engine. Also, do not move any controls.
ain-
4-2
940A4OP02
Advertisement
Table of Contents
