Hyundai HL930A Operator's Manual page 123

6) 6) JOYSTICK STEERING CONTROL LEVER (option) JOYSTICK STEERING CONTROL LEVER
Joystick(A)
Select
button
Forward(F)
(B)
Neutral(N)
Revers(R)
Kick down
button
STEERING STEERING
LH LH
Raise
LH armrest
Lower
Seat
960A3CD63
(1) The system has the following functions concentrated to a collapsible
arm rest : steering, forward / reverse drive and kickdown function.
(2) This means that during normal loading work, the operator does not
need to touch the steering wheel.
(3) The joystick steering pilot lamp on the cluster will be ON when the
lever steering is activated.
When operating on a public road, the steering wheel should When operating on a public road, the steering wheel should
always be used and the joystick steering be disconnected. Also always be used and the joystick steering be disconnected. Also
when operating at high speeds (above 20 km/h when operating at high speeds (above 20
always use the steering wheel. always use the steering wheel.
(4) (4)
Joystick Joystick (A)
①
Joystick steering can be enabled after following conditions have
been satisfied.
- Engine is running.
- LH armrest is placed to the lowered position.
- Gear selector lever is in neutral.
- RCV is deactivated.
- Parking brake is disengaged, but the machine speed is zero.
②
After above conditions are met, press the select button (B).
Then joystick steering pilot lamp
joystick steering can be activated.
③
Steering will remain enabled until machine speed is zero and one
of the following conditions is met.
- LH armrest is raised. - Parking brake is engaged.
- Gear selector lever is in forward or backward position.
- Operator is not seated on the seat. - Press the select button (B).
※
The steering wheel works as usual, even if the joystick steering is
activated.
(5) (5) Forward Forward / reverse selection button reverse selection button
F : Forward drive
N : Neutral
R : Reverse drive
①
To be able to operate the forward / reverse drive, the system must
first be activated using select button (B).
※
The ordinary gear selector control should be in neutral. The ordinary gear selector control should be in neutral.
②
When this function is engaged, it is possible to operate the forward
-reverse drive. If the ordinary gear selector control is activated at
the same time as the joystick steering is activated, the ordinary
gear selector control overrides any selection made by the joystick
steering.
To reactivate the joystick steering, the ordinary gear selector control
must first be moved to neutral and the system again be activated.
③
The FNR select pilot lamp
forward / reverse selection is activated.
(6) (6) Kick-down button : Refer to page 3-47. Kick-down button : Refer to page 3-47.
3-51
km/h) on a work site,
- Operator is seat on the seat.
- Joystick (A) is placed in normal position.
on the cluster will be ON and
on the cluster will be ON when the
) on a work site,