Table of Contents
Advertisement
2)
2)
TRAVELING ON A SLOPE
TRAVELING ON A SLOPE
(1)
Never travel down a slope in neutral.
(2)
Lower the bucket 20-30 cm (1 ft) to the ground so
that it can be used as a brake in an emergency.
(3)
If the machine starts to slide or loses stability,
lower the bucket immediately and brake the
machine.
(4)
When parking on a slope, use the bucket as a
brake and place blocks behind the tires to pre-
vent sliding.
※
Machine cannot travel effectively on a slope
Machine cannot travel effectively on a slope
when the oil temperature is low. Do the
when the oil temperature is low. Do the
warming-up operation when it is going to trav-
warming-up operation when it is going to trav-
el on a slope.
el on a slope.
※
Be careful when working on slopes. It may
Be careful when working on slopes. It may
cause the machine to lose its balance and
cause the machine to lose its balance and
turn over.
turn over.
4-14
940A4OP21
Advertisement
Table of Contents
