Hyundai HL930A Operator's Manual page 229

Hide thumbs Also See for HL930A:
Table of Contents

Advertisement

(5)
Removed DEF/AdBlue® level sender.
Make sure O-ring is on the right position.
Make sure O-ring is on the right position.
(6)
Replace the DEF/AdBlue® filter and fit with a
new filter.
Replace the filter every 4000 hours.
Replace the filter every 4000 hours.
Carry out installation in the reverse order to
Carry out installation in the reverse order to
removal.
removal.
18)
18)
DEF/AdBlue®
DEF/AdBlue® SUPPLY MODULE FILTER
SUPPLY MODULE FILTER
(1)
Inspect the area around the seal and vent of
DEF/AdBlue® supply module filter cap for signs
of leakage.
Turn OFF the master switch.
Turn OFF the master switch.
(2)
Unscrew the DEF/AdBlue® supply module filter
cap. A 30 mm wrench can be used on the cap to
aid in removal.
(3)
Remove the filter equalizing element.
(4)
Remove the old filter element.
A disposable service tool is included with the
filter to aid in filter removal. Use the appropriate
end of the tool, depending on the color of the
plastic on the filter.
When inserting the tool a "click" sound can be
heard which indicates proper engagement with
the filter.
If the filter element and equalizing element
If the filter element and equalizing element
are removed from the aftertreatment DEF/
are removed from the aftertreatment DEF/
AdBlue® tank, they must be discarded and
AdBlue® tank, they must be discarded and
replaced; regardless of condition.
replaced; regardless of condition.
Service tool
6-29
DEF level sender
O-ring
DEF filter
300F6MA94
290F6MA60
Filter element
Equalizing element
Filter cap
290F6MA61A

Advertisement

Table of Contents
loading

Table of Contents