Table of Contents
Advertisement
2. CLUSTER
2. CLUSTER
1) 1)
STRUCTURE
STRUCTURE
The cluster consists of gauges, lamps and LCD as shown below, to warn the operator in case of
abnormal machine operation or conditions for the appropriate operation and inspection.
· Gauges
: Indicate operating status of the machine.
· Warning lamps : Indicate abnormality of the machine.
· Pilot lamps
: Indicate operating status of the machine.
· LCD
: Indicates selected the driving speed and direction.
※ The cluster installed on this machine does not entirely guarantee the condition of the
The cluster installed on this machine does not entirely guarantee the condition of the
machine. Daily inspection should be performed according to chapter 6, M
machine. Daily inspection should be performed according to chapter 6, MAINTENANCE.
※ When the cluster provides a warning immediately check the problem, and perform the
When the cluster provides a warning immediately check the problem, and perform the
required action.
required action.
Warning lamps (see page 3-4)
Speedometer
Left turning pilot lamp
Warning and pilot lamps
(see page 3-4, 3-11)
2) 2)
GAUGE
GAUGE
(1) (1)
Speedometer
Speedometer
7609A3CD03
LCD (see page 3-12)
①
The speedometer displays the speed of machine in mph and
Unit
km/h.
※
The unit (km/h
The unit (
of the monitor and selected unit is displayed.
of the monitor and selected unit is displayed.
Refer to page 3-33.
Refer to page 3-33.
km/h or or mph
mph) can be set by the display set up menu
) can be set by the display set up menu
3-2
AINTENANCE.
T/M oil temperature gauge
Engine coolant temp gauge
Right turning pilot lamp
Fuel gauge
960A3CD02
Advertisement
Table of Contents
