Mounting The Corona-Star - WAGNER PEA-C4-HiCoat Translation Of The Original Operating Manual

VERSION 05/2012
OPERATING MANUAL
8.7

MOUNTING THE CORONA-STAR

The Corona-Star is a Retrofi t-Set for the spray gun, which helps to achieve a better surface
quality (reduction of "orange peel").
Danger from electric current!
Risk of injury and damage to the device.
A
1
C
2
G
3
P_00702
ORDER NUMBER DOC 390829
WARNING
Only trained personnel may modify the Corona-Star.
Prior to mounting the Corona-Star, the high-voltage and
the powder feed must be switched off and secure against
inadvertent switch on.
B
D E
Procedure:
1. Switch off the high-voltage and the powder
feed and secure against inadvertent switch
on.
2. Unscrew the standard nut A from the spray
gun housing B.
3. Screw the new nut C for the Corona-Star D
onto the spray gun housing and fasten in
place.
4. Fasten the cable guide onto the cover plate F
by using the screw E.
F
5. Slide the Corona-Star G onto the spray gun
housing B.
Note:
Check whether the grounding is assured.
6. The spray gun is ready for use again.
PEA-C4-HiCoat
45