VERSION 05/2012
OPERATING MANUAL
8.6.2
FITTING THE ANGLE ADAPTER
6
5
6
5
8.6.3
REPLACEMENT OF THE WEARING PARTS
3
1
2
P_01617
ORDER NUMBER DOC 390829
4
2
1
4
P_01616
4
6
5
7
Procedure:
1. Install electrode holder 1 together with nozzle
2 in the nozzle insert 3 and tighten cap nut 4.
2. Push angle adapter 5 onto the gun body and
screw slightly threaded sleeve 6.
3. Swivel angle adapter 5 in the desired position
and then tighten well threaded sleeve 6.
Procedure:
1. Loosen threaded sleeve 1 and separate angle
adapter 2 from gun body 3.
2. Loosen cap nut 4.
3. Pull out electrode holder 5 together with nozzle
6 of the nozzle insert 7.
Note:
Do not damage the electrode holder, when pulling
out and inserting.
PEA-C4-HiCoat
43