Replacing The Protective Wedge - WAGNER PEA-C4-HiCoat Translation Of The Original Operating Manual

VERSION 05/2012
OPERATING MANUAL
8.4

REPLACING THE PROTECTIVE WEDGE

Note:
A wedge tool is available to prevent the protective wedge from being damaged when
dismantling and inserting.
You will fi nd the necessary wearing parts and spare parts in chapter 13 "Spare Parts" of this
operating manual.
1
3
2
P_00594
2
3
3
ORDER NUMBER DOC 390829
1
1
2
1 Wedge tool
2 Protective wedge (when positioned)
3 Electrode holder (cut open view)
Procedure:
1. Guide wedge tool 1 into electrode
holder 3 up to stop.
P_00595
2. Pull the protective wedge 2 out of the
electrode holder 3 using the wedge
tool 1.
3. Press manually without tool the
protective wedge 2 sideways out of
wedge tool 1.
P_00596
PEA-C4-HiCoat
38