Optimizing The Powder Cloud For Your Coating - WAGNER PEA-C4-HiCoat Translation Of The Original Operating Manual

VERSION 05/2012
OPERATING MANUAL
7.6

OPTIMIZING THE POWDER CLOUD FOR YOUR COATING

Procedure:
1. Switch on the high-voltage generation and the powder feed.
Note:
To minimize the wear on the wearing parts, the total feed air and dosage air should be
under 5 Nm³/h!
The atomizing air should be adjusted for the
fl at spray nozzle to 0.1 Nm³/h
round spray nozzle to 0.2 Nm³/h
2. Adjust the powder quantity and the powder speed on a test piece.
ORDER NUMBER DOC 390829
PEA-C4-HiCoat
29