Replacing The Spray Gun - WAGNER PEA-C4-HiCoat Translation Of The Original Operating Manual

VERSION 05/2012
OPERATING MANUAL
8.2.4

REPLACING THE SPRAY GUN

Before replacing the spray gun any powder residue must be thoroughly removed.
The wearing parts in the spray gun, marked in the spare parts list with " ", must be regularly
checked and, if necessary replaced.
Procedure:
1. Switch of the system or the high-voltage generation.
2. Disconnect the electrical cable 1 from the gun 2.
3. Disconnect the hoses for powder feed 3 and atomizing air 4 from the spray gun 2.
4. Undo the locking nuts 5 and disconnect the spray gun 2 from the support 6.
5. Insert the new gun 2 into the support 6 and attach it with locking nuts 5.
6. Connect the hoses for powder feed 3 and atomizing air 4 to the new spray gun 2.
7. Connect the electrical cable 1 to the gun 2.
8. The spray gun is ready for use again.
ORDER NUMBER DOC 390829
1
4
2
P_01615
PEA-C4-HiCoat
3
5
6
36