Processing Materials; Reasonably Foreseeable Misuse; Residual Risks - WAGNER PEA-C4-HiCoat Translation Of The Original Operating Manual

VERSION 05/2012
OPERATING MANUAL
2.6

PROCESSING MATERIALS

Types of powder which can be charged electrostatically
Metallic powder
2.6

REASONABLY FORESEEABLE MISUSE

The following is prohibited:
coating work pieces which are not grounded
unauthorized conversions and modifi cations to the spray gun
processing liquid or similar coating materials
using defective components, spare parts or accessories other than those described in
chapter 12 of this operating manual
The forms of misuse listed below may result in health issues and/or damage to property:
use of damp powder paint
incorrectly set values for powder discharge
incorrectly set electrostatic values
2.7

RESIDUAL RISKS

Residual risks are risks which cannot be excluded even in the event of correct use.
If necessary, warning and prohibition signs at the relevant points of risk indicate residual
risks.
Residual Risk Source
Skin contact with Handling powder
powder paints and paints and cleaning
cleaning agents agents
Powder paint in air Painting outside the
outside the defi ned defi ned working
working area area
Falling down of Loosening of the
spray guns securing nuts
Residual voltage on Defi cient grounding Electrical shock
live parts
ORDER NUMBER DOC 390829
Consequences
Skin irritation,
allergies
Inhalation of
substances
hazardous to health
Injuries
PEA-C4-HiCoat
Specifi c Measures Lifecycle Phase
Wear protective Operation,
clothing
Note safety data maintenance,
sheets
disassembly
Observe working Operation,
instructions and
operating
maintenance
procedures
Regular check of Operation,
fi xations
maintenance
Danger instruction, Operation,
instruction by maintenance
trainer
9