Disassembly And Disposal; Disassembly; Disposal - WAGNER PEA-C4-HiCoat Translation Of The Original Operating Manual

VERSION 05/2012
OPERATING MANUAL
10

DISASSEMBLY AND DISPOSAL

10.1

DISASSEMBLY

Incorrect disassembly!
Risk of injury and damage to the device.
Procedure:
1. Switch off the system.
2. Lock the supply of compressed air and decompress system.
3. Release electrical cable on control unit.
4. Release electrical cable on spray gun.
5. Disconnect the powder feed hose to the spray gun and to the powder injector.
6. Disassemble atomizing air hose to the spray gun and to the control unit.
7. Loosen the securing nuts to the gun support and remove the spray gun from the
gun support.
10.2

DISPOSAL

Do not dispose of used electrical equipment with household
refuse!
In accordance with European Directive 2002/96/EC on the disposal
of used electrical equipment and its implementation in national
law, this product may not be disposed of with the household refuse,
but must be recycled in an environmentally correct manner.
Wagner, or one of our dealers, will take back your used Wagner
equipment and will dispose of it for you in an environmentally
friendly way. Please contact one of our service points, one of our
representatives or us directly to arrange this.
ORDER NUMBER DOC 390829
WARNING
Before starting disassembly:
- Switch off the energy/compressed air supply.
- Ensure that all system components are grounded.
- Secure system against being switched back on without
authorization.
Observe the operating manual when carrying out all work.
NOTICE
PEA-C4-HiCoat
50