Furuno SFD-1010 Operator's Manual page 21

Flex function display
Hide thumbs Also See for SFD-1010:
Table of Contents

Advertisement

Touch control description
A finger or two are used for touch control. The basic operations are as shown below.
Pinch
*: Pinch action is available only when using the DFF-3D function.
Notes for touch control
 A large amount of waterdrops on the screen can cause improper operation.
Waterdrops on the screen can cause slow touch response. Wipe the screen to
remove the waterdrops before use.
 This equipment uses a capacitive touch screen. Tap the screen with your fingertips
directly. Do not use sharp objects (needle, pen, nail) or a stylus pen. Also, be careful not
to scratch the screen.
 Tapping the screen with gloved fingers may cause improper operation.
 Do not operate the equipment with objects placed on the screen. The touch control
can fail to work properly if objects other than fingertips are touching the screen.
 Keep the equipment away from a radio antenna, fluorescent light, solenoid valve or
other electronic devices to prevent false operation from noise.
 The panel is made of glass. If the panel is cracked or damaged, do not touch it or try
to repair it yourself. Damage caused by improper handling will void the warranty.
Locking the touch screen
The touch screen can be locked to prevent erroneous operation.
Key control:
1. Short press the POWER/BRILLIANCE key to open the [BRILLIANCE] menu.
2. Select the [LOCK TOUCH SCREEN] menu with the arrow keys, then press the
ENTER key.
3. Select [ON] with the arrow keys, then press the ENTER key.
All screen-based controls are disabled.
1-2
1-4
Touch control
Lightly touch the
screen with your
finger and then
remove your finger
from the screen.
Tap
Slide your finger
across the screen.
Drag
Move two fingers on
the screen as to
pinch or stretch.
Function
Select a menu item.
Select a target object or a point on the
screen to display the [POPUP] menu.
Scroll the menu.
Move points and veering points.
Display past pictures on the fish finder
screen.
Enlarge or downsize the bottom echo. Zoom
in or out the display from the center of
pinching/ stretching action.
1. BASIC OPERATION
1-3

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sfd-1012

Table of Contents