5.9.5
[NMEA0183 #1], [NMEA0183 #2] menu
Use the [NMEA0183 #1] and [NMEA0183 #2] turn output of NMEA sentences on or off.
Touch control:
1. Press the MENU/ESC key to open [MENU].
2. Tap [SYSTEM].
3. Tap [NMEA0183 #1] or [NMEA0183 #2].
Related menus appear.
Key control:
1. Press the MENU/ESC key to open [MENU].
2. Select [SYSTEM] with arrow keys, then press the ENTER key.
3. Select [NMEA0183 #1] or [NMEA0183 #2] with arrow keys, then press the ENTER
key.
Related menus appear.
[TX Rate]: Select [Auto] or [Manual].
[Version]: NMEA0183 sentence version can be selected from [V1.5], [V2.0] and [V3.0].
[Output DBT]: Set to output DBT sentence or not.
[Output DPT]: Set to output DPT sentence or not.
[Output MTW]: Set to output MTW sentence or not.
[Output GPatt]: Set to output Gpatt sentence or not.
Note: These are future use for radar and fish finder.
5.9.6
[TLL Output] menu
The [TLL Output] menu enables, disables TTL output and selects the TLL output format.
Touch control:
1. Press the MENU/ESC key to open [MENU].
2. Tap [SYSTEM].
3. Tap [TLL Output]. [Off]/[On] selection box appears.
4. Tap either [Off], [TLL] or [FURUNO-TLL].
5. Tap [×] on title bar to close [MENU].
5-34
5. INSTALLATION
5-33