Table of Contents
Advertisement
Menu items included in the [Current Setting] menu and their settings are as follows.
Menu
[Current]
[Current Vector]
[Diff. Ref. Layer]
[Diff. Layer1]
[Diff. Layer2]
[Flow Direction]
[Source1]
[Source2]
[Source3]
Description
Set to show the current vector or
not.
Sets the configuration of the current
mark.
Set the basic layer to show the
differences between (among) other
currents.
Select the layer to compare with the
basic layer.
Select the layer to compare with the
basic layer.
Select the tide direction to display.
The direction the tide is flowing to,
or the direction the tide is flowing
from.
which layer to show the tide
Select
vector
.
4. MULTI BEAM SONAR DFF-3D
Setting range (Option)
[On], [Off]
[Normal], [Long],
[Normal/Thick],
[Long/Thick]
[Layer1], [Layer2],
[Layer3], [Layer4],
[Layer5]
[Layer1], [Layer2],
[Layer3], [Layer4],
[Layer5]
[Layer1], [Layer2],
[Layer3], [Layer4],
[Layer5]
[To], [From]
[Layer1], [Layer2],
[Layer3], [Layer4],
[Layer5], [Diff Layer1],
[Diff Layer2]
4-35
Advertisement
Table of Contents
Troubleshooting
