Table of Contents
Advertisement
2. RADAR
2.24.4
How to cancel the tracking
How to cancel tracking of individual targets
1.
Tap the acquisition symbol of the target for which you want to cancel tracking, and
the cursor appears on the target.
2.
Tap [CANCEL] shown on the right side of the screen.
2.24.5
Lost target
Targets cannot be tracked if echoes from the tracking target disappear. When a target is
lost, an alarm sounds and the target symbol changes into a lost target symbol (flashing)
and the alert message "LOST" appears at the lower part of the screen. If the target is
lost near the own ship, confirm your safety.
If a target once lost is acquired again, the normal acquisition symbol is restored. To
erase the lost target symbol, tap the lost target symbol, then press the MENU/ESC key.
If the symbol is left flashing, the lost target symbol disappears in about 1 minute.
Take the following steps to cancel the lost target tracking.
Touch control:
1.
Press the MENU/ESC key to open [MENU].
2.
Tap [TT].
3.
Tap [Erase Lost TT Target].
A popup message appears.
4.
Tap [Yes] or [No].
5.
Tap [x] on the title bar to close [MENU].
Key control:
1.
Press the MENU/ESC key to open [MENU].
2.
Select [TT] with the arrow keys, then press the ENTER key.
3.
Select [Erase Lost TT Target] with the arrow keys, then press the ENTER key.
A popup message appears.
2-42
CHAPTER 2 RADAR
Advertisement
Table of Contents
Troubleshooting
