Furuno SFD-1010 Operator's Manual page 16

SYSTEM CONFIGURATION
○ Configuration with two display units (1)
○ Configuration with two display units (2)
xiv
The following connections enable the radar operations from both SFDs.

When both a fish finder and radar are connected, both SFDs can
operate fish finder or radar.
Using the Auto IP function, IP address is assigned without causing

interference on network.
Settings are not shared between SFDs.

Only either one of the SFDs outputs navigation data to LAN.

Both SFDs can be used for display and control of radar or fish finder by

selecting a sensor to use in the [CONNECTING EQUIPMENT SETTING]
menu.
The [CONNECTING EQUIPMENT SETTING] menu appears if the SFD or

SFDs are activated prior to the setup of connecting equipment.
If the [CONNECTING EQUIPMENT SETTING] menu is executed, the

[CONNECTING EQUIPMENT SETTING] menu appears when an application
is restarted.
Using the Auto IP function, IP address is assigned without causing

interference on network.
Settings are not shared between SFDs.

Only either one of the SFDs outputs navigation data to LAN.
