How To Use The Bathymetry Smoothing - Furuno SFD-1010 Operator's Manual

4.6.6

How to use the bathymetry smoothing

If the bottom echo is uneven and difficult to monitor, adjust the bathymetry
smoothing level to smooth the bottom echo.
Touch control:
1. Press the MENU/ESC key to open [Menu].
2. Tap [3D HIST.].
3. Tap [Bottom Sm. Lv.].
[Off]/[Low]/[Medium]/[High] selection box appears.
4. Tap [Off], [Low], [Medium] or [High].
Select [Off] to stop smoothing.
5. Tap [×] on the title bar to close [MENU].
Key control:
1. Press the MENU/ESC key to open [Menu].
2. Select [3D HIST.] with the arrow keys, then press the ENTER key.
3. Select [Bottom Echo Calib.] with the arrow keys, then press the ENTER key.
[Off]/[Low]/[Medium]/[High] selection box appears.
4. Select [Off], [Low], [Medium] or [High] with the arrow keys, then press the ENTER
key.
Select [Off] to stop smoothing.
5. Press the MENU/ESC key to close [Menu].
4. MULTI BEAM SONAR DFF-3D
4-29