Table of Contents
Advertisement
Key control:
1.
Press the MENU/ESC key to open [MENU].
2.
Select [SYSTEM] with the arrow keys, then press the ENTER key.
3.
Select [Tests] with the arrow keys, then press the ENTER key.
4.
Select [DFF-3D Self Test] with the arrow keys, then press the ENTER key.
The DFF-3D Self Test screen appears.
Items to be checked with the DFF-3D self test are as follows.
1
Boot Program Version
2
App Program Version
3
FPGA Version
4
PCB Version
5
ROM
6
RAM
7
Temperature
8
Depth
9
LAN MAC address
10 IP address
Int. Motion Sensor (Roll)
11
Int. Motion Sensor (Pitch)
12
13 B Voltage
※Monitoring menu is limited menu only for the service man who fix the equipment.
4. MULTI BEAM SONAR DFF-3D
Shows Boot Program Version.
Shows Application Program Version.
Shows FPGA Program Version.
Shows PCB Version.
Shows ROM check result.
Shows RAM check result.
Shows water temperature.
Shows depth.
Shows the LAN MAC address.
Shows the IP address of the unit.
Shows the output (roll) of the internal motion
sensor.
Shows the output (pitch) of the internal motion
sensor.
Shows the battery voltage.
4-49
Advertisement
Table of Contents
Troubleshooting
