Table of Contents
Advertisement
4. MULTI BEAM SONAR DFF-3D
System 2
System 3
USB Disk
NMEA 2000
NMEA0183 #1
NMEA0183 #2
Sensor list
Software
Internal buzzer
External buzzer
Touch screen
Key Brill [-], Key
Brill [+]
LCD patterns
The [LCD Test] tests the LCD for proper display of colors. Tap the screen to change
the color. Check colors for correctness.
DFF-3D self test
Check connected sensors are available on [DFF-3D Self Test].
Touch control:
1.
Press the MENU/ESC key to open [MENU].
2.
Tap [SYSTEM].
3.
Tap [Tests].
4.
Tap [DFF-3D Self Test].
The DFF-3D Self Test screen appears.
4-48
Shows the system 2 test results. (Menu for field engineers)
Shows the system 3 test results. (Menu for field engineers)
Shows whether a USB memory is connected to the USB port or
not.
Shows output data in the left box and input data in the right box.
Shows a list of sensors detected.
Shows the version of system 1, system 2 and application.
Tap to turn on/off the internal buzzer.
Tap to turn on/off the external buzzer (if connected).
Checks the touch screen for proper operation. Touch the screen.
A white screen appears, and a red dot is displayed at the touched
position. Drag your finger across the screen. A red line follows
finger movement.
Tap each pad to check if brilliance is decreased, increased
properly.
→
→
→
→
→
→
→
→
→
→
→
Advertisement
Table of Contents
Troubleshooting
