Table of Contents
Advertisement
2. RADAR
4.
Tap [30 s], [1 min], [2 min], [3 min], [4 min], [5 min], [6 min] or [12 min].
5.
Tap [x] on the title bar to close [MENU].
Key control:
1.
Press the MENU/ESC key to open [MENU].
2.
Select [ALERT SETTINGS] with the arrow keys, then press the ENTER key.
3.
Select [TCPA] with the arrow keys, then press the ENTER key.
The [30 s]/[1 min]/[2 min]/[3 min]/[4 min]/[5 min]/6 min]/[12 min] selection box
appears.
4.
Select [30 s], [1 min], [2 min], [3 min], [4 min], [5 min], [6 min] or [12 min] with the
arrow keys, then press the ENTER key.
5.
Press the MENU/ESC key to close [MENU].
2.24.11 Proximity alert
The proximity alert sounds an alarm when the range to target becomes smaller than the
set value. When the alert state is activated, the target acquisition symbol becomes red
an alarm sounds, and the alert message [Proximity] shown at the lower part of the
screen. To silence the aural alarm and erase the alert message, press any key on the
key pad. The dangerous target is displayed until the range to the target becomes larger
than the set value, the range setting of the proximity alert is changed, or the proximity
alert function is turned off.
Touch control:
1.
Press the MENU/ESC key to open [MENU].
2.
Tap [ALERT SETTINGS].
3.
Tap [Proximity].
The [Off]/[0.5NM]/[1NM]/[2NM]/[3NM]/[5NM]/[6NM]/[12NM]/[24NM] selection box
appears.
4.
Tap [Off], [0.5NM], [1NM], [2NM], [3NM], [5NM], [6NM], [12NM] or [24NM].
5.
Tap [x] on the title bar to close [MENU].
Key control:
1.
Press the MENU/ESC key to open [MENU].
2.
Select [ALERT SETTINGS] with the arrow keys, then press the ENTER key.
3.
Select [Proximity] with the arrow keys, then press the ENTER key.
The [Off]/[0.5NM]/[1NM]/[2NM]/[3NM]/[5NM]/[6NM]/[12NM]/[24NM] selection box
appears.
2-48
Advertisement
Table of Contents
Troubleshooting
