Network Settings View - Omron V680S-HMD64-PNT User Manual

Section 8
Web Browser Interface

Network Settings View

 TCP/IP Setting
Item name
IP address
Subnet mask
Gateway address
Device name
*1 The naming rules for PROFINET devices are as follows:
• Devices name must consist of one or more labels. Labels are separated by periods.
• A period cannot be used as the first or last character in a name.
• Labels must consist of up to 63 of the following characters: a to z, 0 to 9, and -
• A dash (-) cannot be used as the first or last character in a label.
• The text string at the beginning of a name must not be "port-<n>" where n is 0 to 9.
• Text strings in the format of IP addresses cannot be used for names. (Example: 192.168.1.200)
If you change the network settings, restart the Reader/Writer. The new settings will be effective after a restart of the
Reader/Writer.
When you restart the Reader/Writer after you change the IP address, Web browser can not reconnect to the Reader/
Writer. If you re-specified the new IP address in the address field of the Web browser, the screen will be appeared.
The error message is displayed if you change the configuration during the Reader/Writer is executing RF tag
communication or Noise measurement.
RFID System
194
User's Manual
(PROFINET)
Description
IP address
Subnet mask address
Gateway address
239 ASCII characters max.
Click this button to set
the displayed values.
Setting range
---
---
---
According to the naming
rules of the PROFINET
standards.
*1
Default
192.168.1.200
255.255.255.0
192.168.1.254
None