Copy Data - Omron V680S-HMD64-PNT User Manual

COPY DATA

This command uses two Reader/Writers to copy data from an RF Tag in the communications field of
one Reader/Writer (A) to the RF Tag in the communications field of another Reader/Writer (B).
PLC
Copy Source Reader/Writer
 Command Area
Signal/data
CmdCode/Command Code
CmdParam1/Command Parameter 1
CmdParam2/Command Parameter 2
CmdData/Command Data
IP Address
 Response Area
Signal/data
ErrCode/Error Code
RespInfo1/Response Information 1
RespInfo2/Response Information 2
Switching Hub
Data type Size
WORD 2 bytes 0008 hex
First word address of the data to copy from the RF Tag
WORD 2 bytes
0000 to FFFF hex
Number of words in the RF Tag to copy
WORD 2 bytes
0001 to 01F4 hex
IP address of Reader/Writer at the copy destination
0000 0000 to FFFF FFFF hex
DWORD 4 bytes
Example: C0A801C8 hex (192.168.1.200)
Data type Size
WORD 2 bytes Error code
WORD 2 bytes Device information
WORD 2 bytes Communications diagnostics result
Host Communications Specifications
Copy Destination Reader/Writer
Function
Function
Section 7
RFID System
165
User's Manual
(PROFINET)