Omron V680S-HMD64-PNT User Manual page 85

3.
Hold onto the connector on the Ethernet Cable
and insert it into the Ethernet connector on the
Reader/Writer.
Do not apply more than 30 N of force to the
connector on the Reader/Writer.
4.
Turn the connector on the Ethernet Cable
clockwise to lock it in place.
Recommended tightening torque: 0.39 to 0.49 N·m
 Contact arrangement of the Reader/
Writer's Ethernet connector
Pin No. Name
1 TD+ Ethernet send signal +
2 RD+ Ethernet receive signal +
3 TD- Ethernet send signal -
4 RD- Ethernet receive signal -
Housing FG Frame ground
5.
Mount the Branch Cable with one M4 screw.
Recommended tightening torque: 0.39 to 0.49 N·m
2 3
1 4
Description I/O
OUT
IN
OUT
IN
---
Installation and Connections
Ethernet connector
on Reader/Writer
(M12 D-Coding, male)
Ethernet connector on cable
Ethernet connector on cable
M4 screw
Section 4
RFID System
83
User's Manual
(PROFINET)