Configuration File - Omron V680S-HMD64-PNT User Manual

Configuration File

This section describes the format of the configuration file. The configuration file uses a normal INI file
format.
• Any line that starts with a semicolon (;) is treated as a comment.
• Any line that starts with an opening bracket ([) is treated as a section declaration row. The row must
also end in a closing bracket (]).
• Any row that does not start with either of the above two characters is an entry row.
 Section and Entry Table
Section name
NetworkSetting
RFTagCommunicationSetting
Entry name
IPAddress Gives the setting of the IP address of the
Reader/Writer. Specify four decimal numbers
separated by periods.
SubnetMask Gives the setting of the subnet mask of the
Reader/Writer. Specify four decimal numbers
separated by periods.
GatewayAddress Gives the setting of the default gateway of
the Reader/Writer. Specify four decimal
numbers separated by periods.
DeviceName Gives the name of the Reader/Writer.
Specify up to 63 ASCII characters.
WebPassword Gives the login password for the Web
browser interface. Specify up to 15 ASCII
characters. Specify "" (blank) for no
password.
WebPortNo Gives the Ethernet communications port
number for the Web browser interface.
Specify 1024 to 65535 decimal.
CommunicationSpe Gives the communications speed between
ed the Reader/Writer and RF Tags. Set a
decimal number.
0: High speed
1: Normal speed
WriteVerify Gives the setting for write verification for
write communications. Set a decimal
number.
0: No verification
1: Verification
CommunicationOpti Gives the setting of the RF Tag
on communications option. Set a decimal
number.
0: Once
1: Repeat
2: FIFO Repeat (Without ID code check)
3: Auto
18: FIFO Repeat (With ID code check)
Web Browser Interface
Description
192.168.1.200
255.255.255.0
192.168.1.254
7090
0
1
0
Section 8
Default
RFID System
211
User's Manual
(PROFINET)