Section 8
Web Browser Interface
Communications Settings View
Item name
RF Tag Communications
option
RF Tag Communications
Speed
Write Verify
Use diagnostics
Refer to Communications Options in Section 6 Functions for information of RF Tag Communications option.
p.95
Refer to Setting Communications Conditions in Section 6 Functions for information of RF Tag Communications option.
p.106
The settings are immediately reflected when you click the "Set" button.
Refer to RFID System Maintenance in Section 6 Functions f for communication diagnostic.
p.111
The error message is displayed if you change the configuration during the Reader/Writer is executing RF tag
communication or Noise measurement.
RFID System
196
User's Manual
(PROFINET)
Description
Select the RF Tag communications
option.
Specify the speed of communications
with the RF Tags.
Select this check box to enable write
verification.
Select to enabled or disabled.
Click this button to set
the displayed values.
Setting range
Once, Auto, Repeat, FIFO
Repeat (Without ID code
check) or FIFO Repeat (With
ID code check)
High speed or Normal speed
Enabled/disabled
Enabled/disabled
Default
Once
High speed
Enabled
Enabled